نتایج جستجو برای: Mechanical properties of steel

تعداد نتایج: 21212249  

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی اصفهان 1389

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه تربیت مدرس - دانشکده منابع طبیعی 1391

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

پایان نامه :دانشگاه آزاد اسلامی - دانشگاه آزاد اسلامی واحد تهران مرکزی - دانشکده علوم پایه 1391

one of the applications of nanotechnology is use of carbon nanotubes for the targeted delivery of drug molecules. to demonstrate the physical and chemical properties of biomolecules and identify new material of drug properties, the interaction of carbon nanotubes (cnts) with biomolecules is a subject of many investigations. cnts is a synthetic compound with extraordinary mechanical, thermal, el...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی اصفهان - دانشکده شیمی 1389

in this project, some new polyaspartimides, (pas)s, have been synthesized form michael addition reaction between new synthetic bismaleimide (bmi) and some aromatic diamines. a characteristic property of this polyaspartimides is a pendent carboxylic group, which introduced to these polymers from new bismaleimide. bismaleimides (bmi) is one of the interesting compounds, which can be self-polymeri...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه علوم کشاورزی و منابع طبیعی گرگان - دانشکده منابع طبیعی گرگان 1391

چکیده: در این تحقیق تأثیر ملاس که یکی از محصولات جانبی صنایع قند می باشد به عنوان یک افزودنی مقاومت خشک جدید در بهبود پالایش پذیری و ویژگی های فیزیکی و مکانیکی مقوای کنگره ای کهنه (occ) مورد بررسی قرار گرفته شد. بدین منظور پنج سطح ملاس( 0،5، 10، 15 و 18%) و سه سطح درجه روانی(420،400و320 میلی لیتر)به عنوان فاکتورهای متغیر در نظر گرفته شد و برای هر تیمار کاغذهای دست ساز با مساحت 2cm200 و وزن پای...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه گیلان - دانشکده فنی 1393

asymmetric membranes are widely used in many industrial membrane separation processes. the major advantage of membrane filtration over the conventional process is its ability to remove a wider spectrum of particles without using any chemicals. hollow fiber configuration offer many advantages over flat-sheet or tubular membranes. the spinning process of hollow fiber may look simple, yet it is te...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه سیستان و بلوچستان - دانشکده مهندسی عمران 1391

one of the most commonly used techniques to reduce the corrosion rate of rebar in concrete is addition substances named corrosion inhibitors into the concrete. corrosion inhibitor is chemical compounds that were added to concrete to prevent corrosion of steel in concrete. sodium nitrate is a type of anodic inhibitors that this study investigatesthe effect of this inhibitor on the properties of ...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه محقق اردبیلی - پژوهشکده کشاورزی 1392

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

Journal: :international journal of iron & steel society of iran 2011
m. m. karkeh abadi a. najafizadeh a. kermanpur y. mazaheri

in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...

پایان نامه :وزارت علوم، تحقیقات و فناوری - پژوهشگاه پلیمر و پتروشیمی ایران - پژوهشکده علوم 1392

هدف اصلی این مطالعه تهیه یک سامانه نوین چسب عاجی دندانی بر پایه نانورس پیوند شده با پلی متاکریلیک اسید، نانورس پیوند شده با پلی اکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی متاکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی اکریلیک اسید و نانورس پیوند شده با کیتوسان اصلاح شده با گلایسیدیل متاکریلات است. پیوند پلی متاکریلیک اسید و پلی اکریلیک اسید بر ری سطح نانورس در حضور و ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید